EDIT Menu

Figure 3 -24 shows an example of a waveform before and after a section is cut. Note that only the section between the two vertical bar cursors is removed including the bar cursors.

Before

After

Figure 3 ￿24: Cutting Waveforms

Waveform data that has been cut is stored in the paste buffer. You can paste this data into another editing area (by selecting Paste from Buffer), insert it into another waveform (by selecting Insert Other Waveform) or use it to perform calculations with another waveform (by selecting Math).

NOTE. If you cut out waveform data by mistake, select Undo from the bottom menu to restore the original waveform data.

Copying/Pasting Waveforms. Use the Copy to Buffer and Paste from Buffer items to copy the edited waveform area and paste it to another location. The following diagram shows the menu configuration.

Operation ￿More 1 of 3￿

 

Copy to Buffer

 

 

 

 

 

 

 

Operation ￿More 1 of 3￿

 

Paste from Buffer

 

 

 

 

3 ￿44

AWG2021 User Manual