EDIT Menu

4.Press the Invert button in the sub-menu to select Vertical.

5.Select Execute from the sub-menu. The waveform is inverted vertically with the specified conditions. Figure 3 -33 shows an example of the waveform before and after it is inverted vertically.

Before

After

Figure 3 ￿33: Vertically Inverted Display

6.Select Go Back from the current sub-menu. The system returns from the Invert... sub-menu to the side menu.

Clip Function. Use Clip... to clip (remove) any waveform data between the vertical bar cursors that is above or below the set level. The following diagram shows the menu configuration for the Clip... item.

Clip Upper

Lower

Operation ￿More 2 of 3￿

 

Clip...

 

Level

 

 

Go Back

Execute

1.Move the left and right vertical bar cursors to define the editing area for clipping, then select Clip... from the second page of the side menu (More 2 of 3). A horizontal (broken) line showing the clip level will appear.

2.Press the Clip button in the sub-menu to select Upper or Lower.

3 ￿56

AWG2021 User Manual