EDIT Menu

Figure 3 ￿83: User defined Code Conversion Menu

3.Define the codes as desired (see ªBasic Operationsº on the following).

4.Select Go Back to return to the Set Pattern menu.

5.Define the pattern data, using the same procedure as in steps 6 ± 10 of the sample process for defining pattern data.

6.Press the CURSOR button to select Code menu item. A knob icon will appear in the upper left side of the code selection menu.

7.Turn the general purpose knob to select user defined.

8.Press O.K. in the sub-menu to execute code conversion. The result will be inserted between the cursors on the data line defined in Step 1.

Moving the Cursor. To move the cursor, turn the general purpose knob. The cursor can be moved throughout the area where data has already been defined, plus one more space. From the Source Data Pattern item, the cursor moves to the Converted Code item. When the cursor reaches the last data item, it will return to the beginning. The cursor can also be moved using the left and right arrow buttons.

AWG2021 User Manual

3 ￿111