EDIT Menu

Clear Pattern. When data has been entered in the pattern data input area, the Import Line Data item in the sub-menu will change to Clear Pattern. Pressing the Clear Pattern button will delete all pattern data.

Shifting Waveform Data Use the shift function to shift the data between the designated vertical bar cursors in individual data lines or markers by the specified points or time. The following diagram shows the menu configuration for the Shift... item.

 

 

 

 

 

Line

 

 

 

 

 

￿peration ￿ More 2 of 3 ￿

 

Shift...

 

 

Value

 

 

 

 

 

 

Go Back

 

 

 

 

 

 

 

 

 

 

Execute

 

 

 

 

 

 

 

 

 

 

 

1.Move the vertical bar cursors to define the part of the waveform data to be shifted, then select Shift... from the second page of the side menu (More 2 of 3).

2.Select Line from the sub-menu. Turning the general purpose knob, select the data line (DATA 11 ± DATA 0) or marker (MARKER1 or MARKER2) on which the data is to be shifted.

3.Select Value from the sub-menu. Using the general purpose knob or the numeric keys, input the shift point value.

Value sets the amount of the shift in points or time. The range for the shift value is ± (designated waveform point size). To shift the data between the vertical bar cursors to the right, enter a positive value; points that shift out beyond the right cursor will be shifted in from the left. To shift the data to the left, enter a negative number; points that shift out beyond the left cursor will be shifted in from the right.

4.Select Execute from the side menu. The waveform data is shifted with the specified conditions. Figure 3 -84 shows the screen before and after the data on line DATA 5 between the vertical bar cursors is shifted 30 points to the right.

AWG2021 User Manual

3 ￿117