EDIT Menu

Factor

Operation ￿ More 3 of 3 ￿

 

Data Expand...

 

 

 

Go Back

 

 

 

 

Execute

1.Move the vertical bar cursors to define the section of the data to be expand- ed. Then select Data Expand... from the third page of the side menu (More 3 of 3).

2.Select Factor from the sub-menu.

Factor is used to set the degree of expansion to any value between 2x and 10x.

3.Using the numeric keys or the general purpose knob, set the degree of expansion.

4.Select Execute from the sub-menu. The section of the waveform between the vertical bar cursors will be expanded to the designated degree, and the waveform point size will increase accordingly. Figure 3 -88 shows the screen before and after the data between the vertical bar cursors is expanded by a factor of 2.

Before

After

Figure 3 ￿88: Expanding Waveform Data

5.Select Go Back from the current sub-menu. The system returns from the Data Expand... sub-menu to the previous side menu.

AWG2021 User Manual

3 ￿123