Tekxon Technology AWG2021 manual 242

EDIT Menu

Inserting Other Waveform Data

Use Insert Other Waveform to insert data from another waveform at a designated point in the waveform being edited. This item is located on the third page(More 3 of 3) of the side menu. The functions of this item are the same as for the Insert Other Waveform item for the graphic display of the waveform editor. See Page 3 -60.

Pseudo%Random Pulse Generator

Use Shift Register Generator... to set a pseudo-random pulse pattern using a shift register for the data between the designated vertical bar cursors on a data line or marker. The following diagram shows the menu configuration for the Shift Register Generator... item.

		Line	Clear All Taps
			Set Maximal
		Register	Linear Taps
		Config...	Set All Regs
			Cancel
			O.K.	0
Operation ￿ More 3 of 3 ￿	Shift Register		Initial Src
	Generator...				1
		User defined				0
			Initial Code
		Code Config...			1
			Out [I/O]				High/Low
		Go Back					Invert/Keep
		Execute

Register Configuration. The pseudo-random pulse generator (with shift register) consists of 2 to 32 registers together with the register output for each and the tap of the feedback loop that performs the EX-OR operation. Selecting Register Config... from the sub-menu enables you to set the pattern for the shift register generator. Figure 3 -89 shows the menu used to set the shift register.

Figure 3 %89: Shift Register Configuration Menu

3 %124 AWG2021 User Manual