EDIT Menu

Destination selects the destination to which the waveform data selected with Source will be copied. Data line DATA 11 ± DATA 0 or marker (MARKER ) can be selected as the copy destination. From the copy source to the copy destination is indicated with an arrow.

4.Select Execute from the sub-menu. The data is copied with the specified conditions. Figure 3 -86 shows the screen before and after the section of waveform data between the vertical bar cursors on line DATA 0 is copied to line DATA 11.

Before

After

Figure 3 ￿86: Copying Lines

5.Select Go Back from the current sub-menu. The system returns from the Copy Line... sub-menu to the previous side menu.

Exchanging LInes Use Exchange Line... to take the data between the designated vertical bar cursors on one line and interchange it with the data on another line. The following diagram shows the menu configuration for the Exchange Line... item.

Source

Operation ￿ More 2 of 3 ￿Exchange Line... Destination

Go Back

Execute

1.Move the vertical bar cursors to define the section of the data to be ex- changed. Then select Exchange Line... from the second page of the side menu (More 2 of 3).

3 ￿120

AWG2021 User Manual