EDIT Menu
Inserting a Blank Line. Pressing the ENTER key causes a blank line to be inserted above the data item marked by the cursor.
NOTE. Blank lines cannot be inserted if there are more than two consecutive blank lines or if there are more than 16 lines in all.
Defining Data. Move the cursor to the desired location to enter a value on the numeric keys. The value at that location will be replaced by the one you have entered. Enterable values will vary depending on the location of the cursor:
In the Source Data Pattern area, only numeric keys 0 through 7 are operational.
In the Converted Code area, only numeric keys 0 through 3 are operational.
Deleting Data. Pressing the delete key will delete the data indicated by the cursor. When a data item is deleted, all of the subsequent data items will move forward one space. If there is no data at the cursor position, the cursor will move one position to the left.
Deleting a Line. When all of the data on the line indicated by the cursor has been deleted, that line will also be deleted and all subsequent data will move up one line.
Setting Items. The Source Data Pattern is used to write the pattern for input data.
0Data at that position is LOW
1Data at that position is HIGH
2The preceding Converted Code data item is 0
3The preceding Converted Code data item is 1
4The preceding Source Data Pattern data item is 0
5The preceding Source Data Pattern data item is 1
6The following Source Data Pattern data item is 0
7The following Source Data Pattern data item is 1
2, 3, 4 and 5 can only be written at the beginning of Source Data Pattern
6 and 7 cannot be written at the beginning of Source Data Pattern
Only the data for the immediately preceding time can be referenced with 2, 3, 4 and 5
6 and 7 are effective as long as the pattern can be written
3 112 | AWG2021 User Manual |