Overview

(1) Bottom Buttons

Use the seven bottom buttons to display corresponding menus.

 

Pressing any button in the MENU column, or the F.G button,

 

displays its corresponding menu. These menus are generally

 

the highest level menus.

 

 

(2) Side Buttons

Use the five side buttons to select the side menus displayed on

 

the right side of the screen. Selecting any item from bottom

 

menu displays a side menu. The side menu is generally a

 

lower level menu.

 

 

(3) CH1 SYNC Output

The CH1 SYNC output connector provides a CH1 sync signal.

Connector

The output level is 1.2 V or greater with a 50￿W termination.

 

 

(4) CH1 MARKER1 Output

The CH1 MARKER1 output connector provides a user7speci7

Connector

fied marker. The output level is 2.5 V with a 50￿W termination.

 

 

(5) Waveform Output

Provides the waveform output path for each channel. A CH2

Connectors

waveform output connector is provided only in instruments with

 

Option 02. The maximum output level is 5 Vp7p with a 50￿W

 

termination. Note however, that output may exceed 5￿Vp7p if

 

AM, Add or Ext AM mode has been selected for CH1

 

Operation from the SETUP menu.

 

 

CAUT￿￿￿. ￿￿ n￿￿ ￿￿￿￿￿ ￿n￿ ￿￿￿￿￿n￿￿ ￿￿￿￿￿￿￿ ￿￿ ￿h￿ ￿￿￿￿￿￿ ￿￿nn￿￿￿￿￿ ￿￿ ￿hi￿ in￿￿￿￿￿￿n￿￿ ￿￿in￿ ￿￿ ￿￿n h￿￿￿ ￿h￿ in￿￿￿￿￿￿n￿￿

(6)Channel On/Off Buttons Press the channel on/off buttons to switch the output for each

and Indicators

channel on and off. When set to on, the LED indicator is lit and

 

a waveform is output. When set to off, the LED indicator is

 

extinguished and a waveform is not output.

(7)CLEAR MENU Button Press this button to cancel any entering alphanumeric input and return the system to the data before input. Also, for a side menu item with •..." attached to it, pressing this button returns the system from the sub menu (lower7level menu) to the side menu. Using remote commands, the user may delete a message that has been entered in the message area (see page￿2￿714).

(8) ON/STBY Button

When the PRINCIPAL POWER SWITCH on the rear panel has

 

been pressed to supply power to the standby circuit, this button

 

can be pressed to provide power to the other circuits of the

 

instrument. Normally this button is used as a power switch.

2 44

AWG2021 User Manual