Operating Examples

2.Press the front panel CH1 On/Off button to switch on waveform output. Figure 2 -23 shows the channel On/Off button and indicator.

On/Off Indicators

CH 1

CH 2

!DO NOT APPLY EXT SIGNAL

25Vp±p MAX OPEN CIRCUIT FROM 50 W

On/Off Buttons

Figure 2 ￿23: Channel On/Off Buttons and Indicators

When the Channel is on, the indicator lights up and the set waveform is output from the CH1 output connector.

3.Set the parameters for the connected oscilloscope as shown below and display the waveform on the oscilloscope screen.

Volt/Div.

200 mV/Div.

Time/Div.

1 ms/Div.

Trigger Mode

Auto

When you change the Clock, Amplitude, or Offset items with the SETUP menu, the waveform changes in real time.

This completes the example 2.

AWG2021 User Manual

2 ￿35