Operating Examples

Figure 2 ￿28: Creating a Ramp Waveform

This completes the waveform creation. Next, name the waveform file and exit the waveform editor.

22.Select Close/Write from the bottom menu.

23.Select Write and Close from the side menu.

The display used to enter the file name will appear.

24.Input SAMPLE±1 as the file name. Use the general purpose knob to select S from the character menu.

Then press the VALUE button. S is inserted into the file name input column. In the same manner, input A, M, P, L, E, ±, 1 (see Figure 2 -29).

AWG2021 User Manual

2 ￿41