Operating Examples

6.Select Edit from the side menu.

The SAMPLE±2 waveform file will appear on the screen.

You will now set the range for waveform creation. The arbitrary waveform will be created within this range using the Point Draw function.

7.Press the CURSOR button on the front panel. This will activate the vertical cursor bar in the left-hand side of the screen.

8.Press ª2º, ª5º, ª0º, and ENTER to set the point value of the left cursor to 250.

9.Press the CURSOR button on the front panel again to activate the vertical cursor bar in the right-hand side of the screen.

10.Press ª7º, ª5º, ª0º, and ENTER to set the point value of the right cursor to 750.

Figure 2 ￿32: Setting the Edit Range

You may now create the arbitrary waveform within the range designated by these two vertical bar cursors, using the Point Draw function.

11.Select Operation from the bottom menu.

AWG2021 User Manual

2 ￿45