Operating Examples
Creating Arbitrary
Waveforms Using the
Point Draw Function
Arbitrary waveforms can be created on the graphic display with the POINT DRAW function.
Use the following procedure to make a copy of the file SAMPLE±1.WFM created in the previous operation.
1.In the initial EDIT menu, select Copy bottom menu. The display used to enter the name of the copy of the file will appear, as shown in Figure 2
Figure 2 %31: Entering a Name for the Copied File
In this example, you will name the copy SAMPLE±2.
2.Press the Delete key on the front panel to delete the ª1º in the file name.
3.Press ª2.º
4.Select O.K. from the side menu.
SAMPLE±1 will be copied as a new waveform file named SAMPLE±2.
5.Check to make sure that the SAMPLE±2 waveform file is displayed inverted in the file list in the initial menu. If it is not selected, turn the general purpose knob until the name SAMPLE±2 is displayed inverted.
2 %44 | AWG2021 User Manual |