Operating Examples
Example 3: Creating Files and Arbitrary Waveform Outputs
When using the instrument for arbitrary waveform output, you should first use the editors in the EDIT menu to create the waveform to be output. In this operation, you will create an arbitrary waveform with the editors, and then you will set the conditions for waveform output (frequency, amplitude, offset, etc.) in the SETUP menu. Finally, you will set the operation mode in the MODE menu to output the waveform.
In Example 3, we will practice the following series of operations:
Creating a Waveform File
Creating Arbitrary Waveforms Using the Point Draw Function
Creating Waveforms Arithmetically
Creating an Equation File
Creating a Sequence File
Creating Autostep Files
Setting the Output Parameters
Setting Operation Mode and Waveform Output
Creating a Waveform File Use the waveform editor graphic display to create a waveform file by performing the following steps:
1.Press the EDIT button in the MENU column. Figure 2
2 36 | AWG2021 User Manual |