Tekxon Technology K3 manual Troubleshooting, Error E Cause

10 Troubleshooting

If your camera does not work properly, please check the following items. If the problem still exists please contact your dealer.

Symptoms	Cause and solution
Error A	Cause:	Not enough light
Camera does not take photos	Solution:	Change angle of camera to include more light
		or use automatic flash.
Error B	Cause:	Weak batteries
Photos disappear from the LCD
after a period	Solution:	Insert two fresh batteries.
Error C	Cause:	The PC does not have enough free RAM.
		Close all other applications before downloading.
Not all images can be
	Solution:	If the problem persists, download the images
downloaded to the PC
		one at a time to the PC and save them there
		before transferring the next image.
Error D	Cause:	Camera shuts down automatically.
Camera switches off after 5
minutes. LCD switches off.	Solution:	Restart camera.
Error E	Cause:	The PC’s USB port is deactivated in the BIOS.
When the camera is connected to
the PC for the first time, no new	Solution:	Activate the port in the PC’s BIOS.
hardware is found.
Error F	Cause:	It is normal for the shutter speed to be slower in
The shot to shot time is longer		dark conditions.
when taking pictures in dark	Solution:	Change the camera angle or improve the light
conditions.		conditions.
Error G	Cause:	PC or camera is busy and there is no
The camera does not start after		connection between the two.
connection to the PC. The
camera display lights up and	Solution:	Disconnect the USB cable from the PC, check
LCD shows all symbols.		why the PC is busy and insert the cable again.

Note: This table contains possible causes of error. Some of these are normal phenomena.

35