Issue A Rev 2 108891 Telect, Inc.

4-1

4User Functions
PATCHING
Step Act ion
1. Partially insert a dual Bantam patch-cord in the OUT and IN jacks
of the appropriate NE-2 circuit on the front of the DNI1-B panel:
2. Twist the plug on the other end of the cord so that its curved side is
in the opposite orientation—if the first plug’s curved side is up, the
second plug’s must be down. This is how you connect the IN of one
circuit to the OUT of another.
SideVi ew of
DNI1-BPanel
OUT
IN
CurvedSide
Out
Out
In
In