3.3WALL MOUNTING CLIP
1)Located on the front of the telephone, above the speaker grill, is the wall mounting clip. Remove this clip by firmly pushing it upward, in the direction of the hook switch.
2)Rotate the clip 180º so that the side with the protruding edge is towards the top. This edge will hold the handset (please refer to figure 5.)
FIGURE 5
4.
USING
THE
DATA
PORT
The data port is located on the right hand side of the telephone, as it is facing you. Use this jack to connect a laptop or desktop computer, answering or fax machine in parallel to the same phone line to which the telephone is connected.
FIGURE 6
DATA PORT
5.
ADJUSTING
THE
RINGER
VOLUME
Your B100 has three ringer volume levels: Off, Low and High. To adjust, slide the switch located along the right hand side of the telephone to the desired ringing level. NOTE: The ringer sound level is preset to the “HIGH” setting.
FIGURE 7
6.
HANDSET
VOLUME
CONTROL
There are three (3) volume levels for the handset volume. To increase or decrease the handset volume, press the VOLUME UP or DOWN keys.
7.
OPERATION
7.1 PLACING AND ANSWERING CALLS USING THE HANDSET
To make a call, pick up the handset. When you hear the dial tone, dial the desired number. To answer an incoming call, pick up the handset.
7.2 USING REDIAL
The redial function allows you to redial the number that was last dialed. Pick up the handset and press the REDIAL key. The number will be dialed automatically.
7.3 USING FLASH
The FLASH key supports custom calling features. For example, if you have subscribed to call waiting, press FLASH to answer an incoming call without disconnecting the current call. Press FLASH again to return to the first call.
7.4 USING MUTE
To temporarily switch off the handset microphone, press MUTE. The MUTE indica- tor lights and the microphone turns off, but you can still hear the person on the other end of your conversation. Press MUTE again to resume your conversation.
8.
MESSAGE
WAITING
There is an
9.
CARING
FOR
YOUR
B100
Your B100 telephone is an example of superior design and craftsmanship. These suggestions will help you care for your phone so you can enjoy
1)Keep the phone dry. If it gets wet, wipe it dry immediately. Liquids may contain minerals that can corrode the electronic circuitry.
2)Use and store the phone only in normal temperature environments. Extreme temperatures can shorten the life of electronic devices and distort or melt plastic parts.
3)Keep the phone away from dust and dirt, which can cause premature wear of parts.
4)Handle the phone gently and carefully. Dropping it can damage internal circuit boards or external parts, and can cause the phone to work improperly.
Modifying or tampering with the phone’s internal components can cause a malfunc- tion. If your phone is not performing as it should, see your distributor for assistance. If the trouble is affecting the telephone lines, the phone company or service provider may ask you to disconnect the phone until the problem is resolved.
4 | 5 |
