Removing the bottom basket ...
To remove:
1.Lift front of basket up to remove from wall supports.
2.Pull out
To replace:
1 Positlon basket in bottom of freezer.
^.,,I ,,.I / /
2 Insert Dasket Inlo wall suppons one siae aT a Time
Adjusting the freezer shelf...
To remove | shelf: |
|
|
|
|
| |
1 Remove food from shelf |
|
|
| ||||
2 | Slide shelf straight out to | stop | Guide | Stop | |||
3 | Lift front |
|
|
|
| ||
|
|
|
|
|
| ||
4 | Slide the | rest of | the | wav | out | Shelf | Stop |
To replace | shelf: |
|
|
|
|
| |
1 Fit back of shelf on top of gulaes with wire stops on | |||||||
| bottom of guides. |
|
|
|
| ||
2 | Loft front, | then | slide | shelf until It clears | the guide |
| |
| stops |
|
|
|
|
|
|
The key eject lock...
can | help | reduce | the hazard | of child | To lock | or unlock | the | freezer | you | must | hold the | |||
entraorrent |
|
|
| Key ~rl the lock | while | turning | The | lock | IS spring | |||||
|
|
|
|
| loaded | so the | key cannot be | left or | the | lock | ||||
|
|
|
|
| If the | key | IS | lost. | contact | your | WHIRLPOOL | |||
|
|
|
|
| dealer | for a replacement | Always give the com- | |||||||
|
|
|
|
| plete model and serial number of your freezer | |||||||||
|
|
|
|
| when | requesting | a | replacement | key |
| ||||
The signal light...
automatically warns of any unexpected power failure
SIgnal Llghl
If the signal light is not glowing, immediately check, l for power Interruption,
l for an unplugged power cord, l for a burned out signal light.
Energy saving tips...
You can help your freezer use less electricity
l Check door gasket and level freezer to assure a good door seal
l Clean the condenser coils regularly
l Keep door openings to a mlnlmum. Remove several Items at one time Keep contents organized to ellml- note searching
l Fill to capacib Follow recommended pror 2dures for freezing foods See pages 8 and 9
To replace burned out signal light: 1 Unplug power cord from outlet
2 Open the freezer door
3Push out signal light from behind, then unplug burned out light. Replace light with one of the same wattage and size Signal light can be ordered from your WHIRLPOOL dealer,
Part No. 1103639
4.Close freezer door and plug power cord into outlet.
l Set Temperature Control to provide temperatures around 0 F [ 17 8 C) There IS no need to store foods below 0 F
l Keep door locked to ensure door closure
lDo not let frost build up to more than !‘3inch (6 mm) thick Efftclency IS reduced
l Keep Power Saving Control on OFF when humldlty is low
6
