5.INSTALLATION

5.1DESKTOP INSTALLATION

1)Plug one end of the handset coiled cord into the handset. Plug the other end of the cord into the handset jack located on the left side of the phone base.

2)Place the handset in the handset cradle.

3)Plug one end of the supplied line cord into the LINE jack on the bottom of your phone. Then route the line cord through the left slot of the desk/wall mount bracket.

4)Plug the other end of the modular cord into the wall jack.

HANDSET JACK

FIGURE 3

5.2WALL MOUNTING

1)Plug one end of the handset coiled cord into the handset. Plug the other end of the cord into the handset jack located on the left side of the phone base (please refer to figure 3.)

2)Place the handset in the handset cradle.

3)Remove the desk/wall mount bracket from the bottom of the B120D. Rotate the bracket 180º and reinstall it into the four slots the bottom of the B120D.

4)Connect the short line cord into the LINE jack on the bottom of your phone. Connect the other end of the line cord to the line jack on the wall mount plate.

5)Slip the phone onto the wall plate jack, lining up the wall mounting holes, and then slide the telephone down so it is firmly in place.

FIGURE 4

4

Page 6
Image 6
Teledex B120D manual Desktop Installation, Wall Mounting