Teledyne API - Model T200H/T200M Operation Manual Operating Instructions
75
A
1:NXCNC1=100 PPM
1
A2:NOCNC1=100 PPM1
A3: N2C NC1 =2 5 PPM 1
A4:NXCNC2=100%1
RANGE
NOX STB
SAMP FL W
OZONE FL
PMT
NORM PMT
AZE RO
HVPS
RCELL TEMP
BOX TEMP
PMT TEM P
CONV TEMP
O2 CELL TEMP2
RCEL
SAMP
NOX SLOPE
NOX OFFS
NO SLOPE
NO OFFS
O2 SL OPE 2
O2 OF FS 2
TIME
SAMPLE A1:NXCNC1=100 PPM
1
NOX = XXX
< TST TST > CA L SETU P
1
Default setting s for u ser
selectable reporting range
settings.
2 Only appears if O2 sensor
o
p
tion is installed.
Toggle <TST TST> to scroll
throug h list of functions
Figure 4-2: Viewing T200H/M TEST Functions
Note A value of “XXXX” displayed for any of the TEST functions indicates an
out-of-range reading or the analyzer’s inability to calculate it. All pressure
measurements are represented in terms of absolute pressure. Absolute,
atmospheric pressure is 29.92 in-Hg-A at sea level. It decreases about 1
in-Hg per 300 m gain in altitude. A variety of factors such as air
conditioning and passing storms can cause changes in the absolute
atmospheric pressure.
4.2.2. WARNING MESSAGES
The most common instrument failures will be reported as a warning on the analyzer’s
front panel and through the COM ports. Appendix A provides the recommended action
and explains how to use these messages to troubleshoot problems. 7.1.1 shows how to
view and clear warning messages.
07270B DCN6512