Before Using
Connection between the water inlet hose and the washing machine
1.Do not take off the water absorption cushion. Please check if the cushion is dropped or damaged before each usage. If it happens please contact our
2.Put the nut of the water inlet hose on the valve jointer.
3.Fasten the nut. Swing it gently to confirm if it's suitable.
Nut of the water inlet hose
Water absorption cushion
Jointer of the water inlet valve
Connection between the jointer of the water inlet hose and the water inlet hose
1.Push down the slider. Insert the water inlet hose into the jointer.
2.Hang the lock lever to the jointer. Release the slider till a click sound is heard.
Jointer of the water
inlet hose
Locking lever
Slider
Check the connection between the jointer of the water inlet hose and the water faucet
1.Swing the hose gently to confirm if it is fastened stable. 2.After installation, open the faucet to check if it leaks.
3.Do not bend the hose with overstrain. 4.Before each usage please check if
the connection between the jointer of the water inlet hose and the water faucet, and the installation of the
water inlet hose are firm, so as to prevent dropping from improper Installation position.
Dismantle the water inlet hose
1.Close the water faucet.
2.Press the locking lever. Push down the slider. Then pull of the water inlet hose. If the machine is used more than once every week, the jointer of the water inlet hose can be kept on the faucet to prevent damaging the fixing screw.
7
Locking lever
Slider
