Telenetics MIU9.6FPD manual Conductor Type, Analog Line Specifications

5.METALLIC CONDUCTOR SPECIFICATIONS

The MIU9.6FPD contains digital circuitry for connection 2 or 4-wire metallic conductors (eg; pilot wires). The MIU9.6FPD will also interface to Power Line Carrier or Microwave radio voice channel networks.

The MIU9.6FPD has an RJ-11terminated connector. The following lists the MIU9.6FPD conductor interfaces

Conductor Type:

Conditioned or unconditioned, Bell type 3002, 2 or 4-wire, full duplex voice grade or metallic lines or better.

Analog Line Specifications:

Bandwidth	300	Hz to 3400 Hz (±3dB)
Impedance	600	/ 900 ohms , balanced
Frequency Response	400 to 3000Hz (±2dB)
Receiver Input Level	-16dBm max.
Output Level	+7 dBm
Noise Signal Level	-48 dBmO

MIU9.6FPD Installation, Operation & Diagnostics April 25, 1998 Page 7