Configuring the Modem

On the front panel of the modem, there are:

cOne Power LED and six status LEDs (see page 21)

cA rotary test switch (see page 22)

On the back panel of the MOT202TSA modem, there are:

cA power cord or power input connector

cA power switch for turning the modem on and off

cA fuse, 3/8 amp, 250 Volt, slow-blow

cA DB25 female connector for accommodating a DTE device

cAn RJ-45 connector for connecting to a communications line

Configuring the Modem

The modem obtains some operating characteristics from jumper settings. The default jumper settings are for common 4-wire full-duplex applications. To reconfigure the modem for 2-wire half-duplex and special applications, you must change the default jumper settings.

To change jumper settings, push the two tabs on the back of the modem to open the modem cover and gain access to the jumper settings on the printed circuit board (see Figure 2-3). Then set the jumpers to the desired settings and replace the cover.

Figure 2-3. Gaining Access to the Modem Jumpers

Figure 2-4 on the next page shows the location of the modem jumpers. Table 2-1 on page 13 summarizes the jumper settings (default settings are bold).

Page 11

Page 10
Image 10
Telenetics MOT202TSA, MOT202TRM manual Configuring the Modem

MOT202TSA, MOT202TRM specifications

Telenetics, a leading provider of telemetry and communication solutions, has introduced the MOT202TRM and MOT202TSA models, enhancing the landscape of data acquisition and remote monitoring. These devices are engineered to cater to the needs of various industries, including transportation, utility monitoring, and environmental management. Their robust design and advanced features make them indispensable tools for organizations seeking real-time data analysis and remote control capabilities.

The MOT202TRM model is primarily focused on telemetry applications, equipped with an integrated modem that supports multiple communication protocols. This versatility allows the device to operate seamlessly in diverse environments. With a wide range of supported interfaces, including serial and digital inputs, the MOT202TRM can connect effortlessly to various sensors and equipment, ensuring uninterrupted data flow. Its advanced processing capabilities guarantee quick data acquisition and transmission, making it ideal for applications that demand immediate insights and decision-making.

On the other hand, the MOT202TSA model is tailored for advanced sensor monitoring and control. Its sophisticated architecture supports not only telemetry but also extensive data logging capabilities. The device features enhanced security protocols, protecting sensitive data during transmission. The MOT202TSA supports over-the-air firmware updates, which simplifies maintenance and ensures that users benefit from the latest technological advancements without the need for physical intervention.

Both models capitalize on Telenetics' commitment to durability and reliability. They are designed to withstand harsh environmental conditions, featuring rugged enclosures that protect against dust, moisture, and extreme temperatures. This resilience makes them suitable for outdoor applications, providing peace of mind to users who require dependable performance regardless of the setting.

Another significant characteristic of the Telenetics MOT202TRM and MOT202TSA devices is their energy efficiency. Designed with low power consumption in mind, these models can operate sustainably for extended periods, making them ideal for battery-powered applications.

In conclusion, the Telenetics MOT202TRM and MOT202TSA models stand out with their advanced features, robust technology, and versatility, providing comprehensive solutions for telemetry and remote sensor monitoring. Their emphasis on durability and energy efficiency further enhances their appeal in a market that demands reliability and sustainability.