9. Press
VOLUME
to adjust the volume of the P200/P250 built-in
speakers.
NOTE: If you have an external powered speaker system plugged into
the
AUDIO OUT
jack, turn it on and adjust the volume of that external
system. (The levelat the
AUDIO OUT
jack is controlled by
VOLUME
.)
10. Turn on and play the connectedVCR, LaserDisc player, etc.
11. Press
SOURCE
on the P200/P250 keypanel to select one of the
video inputs.
12. To further enhanceor change the image on the Firefly™P200/P250,
refer to the Keypanel and Menu Mode On-Screen Control sections of
this manual.
NOTE: Ten seconds after you make a change, the image
enhancements that you have made will be saved. These saved
enhancements will be used as the default settings the next time that you
activate your P200/P250.
13. When you are not projectingan image, press
POWER
to turn off the
projector and lamp.
☞
☞
COMPUTER MONITOR
AUDIO
OUT
AUDIO
IN
SVHS
VIDEO
Figure 10. P200/P250 Screen Focus
12 User Manual