ENGLISH

Figure 6.

4 Guidelines/Recommendations for best performance

Compatibility

The receiver and transmitter must be set to the same channel to operate together.

Using Multiple Wireless Systems

If two or more N/DYM Wireless and/or other VHF/UHF wire- less systems are being used in the same location, proper fre- quency coordination is necessary to avoid interference. The following N/DYM System channels will work together:

Channels 0,1,2,3, & 4 or Channel 5,6,7,8, & 9

Multiple System Setup & ClearScanTM

Contact your dealer or Electro-Voice for assistance, if you are planning to add more wireless systems to be operated simul- taneously in the same location.

ClearScanTM is most useful for finding operating fre- quencies for situations where no more than 2 systems will be used simultaneously. When setting up more than 2 systems, use ClearScanTM to choose the first

channel of operation. Set up subsequent systems fol- lowing the channel groupings listed above in the “Using Mulitple Wireless Systems” section.

Potential Sources of Interference

There are many potential sources of interference for your wireless system. Any electronic product that contains digital circuitry including digital signal processors (reverb/multi- effects units), electronic keyboards, digital lighting controllers, CD players and computers, all emit RF energy that can

adversely affect the performance of your wireless system. It is always best to place your receiver as far away from these devices as possible to minimize this potential source of prob- lems.

Battery Recommendations

Fresh 9-volt alkaline batteries from a quality manufacturer will yield the best performance from your N/DYM transmitters. Rechargeable 8.4-volt Ni-cad batteries can be used, but will yield much shorter operational time.

When the transmitter switch is turned on, the red battery light will flash once if the battery is good. If

the light does not flash or stays lit continuously, the battery is weak or dead. If the light comes on during use, the battery is weakening and should be replaced as soon as possible.

If sound quality degrades during use, it may be the result of a weakening battery.

Receiver and Antenna Placement

Do not place the receiver near a large metal object or surface.

Locate the receiver as close as possible to the area where the Transmitter user will be working. Ideally, position the

receiver so that the transmitter is within site of the receiver.

When using multiple systems, do not allow antennas to cross or touch each other.

Page 6 Page 8
Page 7
Image 7
Telex N/DYM SERIES manual Guidelines/Recommendations for best performance
Page 6 Page 8

N/DYM SERIES specifications

Telex N/DYM SERIES is a line of professional dynamic microphones designed specifically for broadcast, recording, and live sound applications. Renowned for their high-quality audio capture and robust build, these microphones are a staple in the audio engineering world and are favored by artists, sound engineers, and broadcasters alike.

One of the standout features of the Telex N/DYM SERIES is its use of neodymium magnet technology. This allows for a higher output level and improved sensitivity compared to traditional dynamic microphones. Neodymium magnets provide an efficient transduction mechanism, enabling the microphone to capture a wider frequency range with great clarity and detail. The result is a microphone that can accurately reproduce vocals and instruments with remarkable fidelity.

Another key characteristic of the N/DYM SERIES is its cardioid polar pattern. This design helps to minimize ambient noise and feedback by focusing on sound coming from directly in front of the microphone while rejecting sounds from the sides and rear. This makes it particularly useful in live environments where stage noise and audience interference can be problematic, allowing performers to deliver their sound without unwanted distractions.

Durability is also a major focus of the Telex N/DYM SERIES. Built to withstand the rigors of professional use, these microphones feature a rugged construction that can handle the inevitable wear and tear of on-stage performances. The sturdy grill and housing help protect the internal components, ensuring that the microphone maintains its performance and reliability over time.

Furthermore, the N/DYM SERIES microphones often come equipped with advanced internal shock-mount systems. These systems reduce handling noise and vibrations that could otherwise color the sound. This is crucial in both studio and live settings where clarity is of paramount importance.

The versatility of the Telex N/DYM SERIES is another factor that makes it a popular choice among audio professionals. Whether it’s used for vocal performances, acoustic instruments, or amplified sound sources, the microphone adapts well to a variety of applications. The series ensures that users can achieve outstanding results across different scenarios, from studio recordings to live gigs.

In summary, the Telex N/DYM SERIES combines high-quality neodymium technology, a cardioid polar pattern, rugged construction, and innovative design features to create microphones that excel in both live and studio settings. This comprehensive range of characteristics makes the N/DYM SERIES a reliable and effective choice for those seeking exceptional audio quality and durability in their microphone applications.
Top Page Image Contents