Headset Operation (cont.)
2.Connect the headset as shown in Figure 4. If using the standard version, set the stereo/mono headphone switch to match the type of sound system in your aircraft. If the headset is set for stereo and the intercom is set for mono, sound will only come out of one earcup.
Mute Switch |
To Radio Microphone “IN” Jack |
Cell Phone Jack |
Auxilary Jack |
To Radio Receiver “OUT” Jack |
Stereo/Mono Switch |
Figure 4 Headset Connections |
3.Connect cellular telephone and/or audio input devices as desired.
4.Rotate the entire boom overhead to wear the microphone on either the right or left side of the head (See Figure 5).
Figure 5 |
Microphone Placement |
5.Reshape the boom so that the microphone will be in front of the mouth.
6.For best noise cancelation, position the microphone as close to the mouth as possible and speak in a normal voice (Figure 7).
7.For mic replacement, press the release catch and carefully pull out the mic element. Avoid pulling the connecting wires (Figure 6).
Figure 6
Mic Element Removal
Figure 7
Mic Placement
Page 4
