CHAPTER 6

CARE AND MAINTENANCE

SECTION I. UNIT CARE

6-1. GENERAL
Although the TI4676 has been ruggedized and made weather resistant
within the scope of unit’s intended use, it is essential that good gen-
eral care be taken to maintain unit in good operating condition and to
maximize unit’s operational life.
6-2. AFTER USE - Unit should be protected from the environmental ele-
ments and man made hazards. Ideally unit should be secured in the air-
craft or hanger. Most importantly, unit shall be fully covered if stored
exposed to environmental elements.
1. KEEP UNIT RECEPTACLES AND OUTER CASE CLEAN - wipe with dry cloth.
2. KEEP FOREIGN OBJECTS OUT OF UNIT - Cover unit to prevent
foreign objects, water, and dirt from entering vent ports and recep-
tacles. Keep a/c compartment closed when not in use.
3. AFTER USE PLUG UNIT INTO AC POWER SUPPLY WHEN NOT IN USE. (

CHECK

FUSE WINDOW FOR PROPER SETTING

). To maximize life of power cells and to
ensure unit is always ready for use, unit should remain plugged in to AC
power when not installed in aircraft. NEVER LET DISCHARGED UNIT SIT FOR
MORE THAN 24 HOURS WITHOUT FULLY RECHARGING POWER CELLS.
4. PROTECT AC POWER CORD FROM DAMAGE - Prevent from being cut, gouged,
crushed, dragged or otherwise abused.
SECTION II.

MAINTENANCE

6-3. MAINTENANCE OF UNIT - The TI4676 MPU is a maintenance-free unit,
no repairs are authorized. Warranty will be void if sticker is tampered
with. If unit fails to operate contact Manufactures Warranty Claim (see
unit warranty).
6-1