www.ti.com
Headphone Connector (J700)
2.4Headphone Connector (J700)
PCBConnector
(TopView)
2
1
3
4
Figure 2-5. J700 Pin Numbers
Table 2-6. J700 Pin Description
PIN | NET NAME | DESCRIPTION | |
NO. | AT SCHEMATICS | ||
| |||
1 | Right headphone output | ||
2 | GND | Ground | |
3 | – | Reserved | |
4 | Left headphone output |
2.5Control Interface (J40)
This interface connects the
|
| Table | |
PIN NO. | NET NAME | DESCRIPTION | |
AT SCHEMATICS | |||
|
| ||
1, 3, 11, 17, | GND | Ground | |
25, 26, 31, 32 | |||
|
| ||
2, 8, 9, |
|
| |
– | Reserved | ||
19, |
|
|
4 | RESET |
5 | |
6 | MUTE |
7 | PDN |
10 | SDA |
12 | SCL |
20SD
21SD
22OTW
23OTW
24
33, 34 | 5 V |
Backend error (or soft reset). Provides reduced click and pop reset, without resetting I2C volume register settings.
Ramp volume from any setting to noiseless soft mute. Mute also can be activated by I2C. Power down. The TAS5518 goes to
I2C data clock
I2C bit clock
Shutdown reporting. Activated if one or more TAS5152 has high current or high temperature (see Chapter 3).
Shutdown reporting. Activated if one or more TAS5152 has high current or high temperature Pin 21 connected to pin 20 (see Chapter 3).
Overtemperature warning. Activated if one or more TAS5152 has reached temperature warning level.
Overtemperature warning. Activated if one or more TAS5152 has reached temperature warning level. Pin 23 connected to pin 22.
Headphone select. Headphone active when LOW and inactive when HIGH. To use this pin, a
SLEU074 | System Interfaces | 15 |
Submit Documentation Feedback