Description

1.1 Description

The THS4151 EVM is a good example of PCB design and layout for high-speed operational amplifier applications. It is a complete circuit for the high-speed operational amplifier. The EVM is made of the THS4151 high-speed operational amplifier, a number of passive components, and various features and footprints that enable the user to experiment, test, and verify various operational amplifier circuit implementations. The board measures 4.5 inches in length by 2.5 inches in width. Initially, this board is populated for a single-ended input amplifier (see Figure 1-2 for populated circuits). The outputs (VO+ and VO±) can be tested differentially or single ended. Gain is set to one and can be changed by changing the ratios of the feedback and gain resistors (see the device datasheet for recommended resistor values). The user may populate various footprints on the evaluation module board to verify filter designs or perform other experiments. Each input is terminated with a 50-Ωresistor to provide correct line-impedance matching.

1.2 Evaluation Module Features

THS4151 high-speed operational amplifier EVM features include:

JVoltage supply operation range: 5-V to ± 15-V operation (see the device data sheet)

JSingle and differential input and output capability

JNominal 50-Ωinput and output termination resistors. They can be configured according to the application requirement.

JVOCM direct input control (see schematic and the device data sheet)

JVOCM pin can be controlled via transformer center-tap (see schematic)

JShutdown pin control, JU1 (if applicable to the device, see the device data sheet)

JInput and output transformer footprints for changing single-ended signals to differential signals

JFootprint for high-precision, balanced feedback and gain resistors (0.01% or better)

JFootprints for low-pass filter implementation (see application note SLOA054A)

JFootprints for antialiasing filter implementation (see application note SLOA054A)

JDifferential probe terminals on input and output nodes for differential probe insertion

JVarious GND and signal test points on the PCB

JCircuit schematic printed on the back of the EVM

JA good example of high-speed amplifier PCB design and layout

1-2

Introduction and Description

Page 7 Page 9
Page 8
Image 8
Texas Instruments THS4151 manual Description, Evaluation Module Features
Page 7 Page 9

THS4151 specifications

Texas Instruments THS4151 is a high-performance analog amplifier designed to meet the needs of various applications where precision and low power consumption are critical. This device is known for its wide bandwidth, low noise, and high slew rate, making it suitable for high-speed signal processing in telecommunications, industrial automation, and medical devices.

One of the main features of the THS4151 is its high bandwidth, with a gain bandwidth product of up to 50 MHz. This characteristic allows the amplifier to handle fast-changing signals efficiently, which is essential in modern electronic devices that require rapid response times. Furthermore, the THS4151 boasts a high slew rate of 100 V/µs, enabling it to accommodate fast signal swings without distortion, thus ensuring signal integrity across a variety of applications.

The THS4151 utilizes advanced complementary bipolar technology to achieve excellent performance while maintaining low power consumption. With a supply voltage range from 4.5 V to 12 V, the device can operate effectively in battery-operated systems, contributing to longer battery life and reduced power costs. The low quiescent current of only 5 mA further enhances its efficiency, making the THS4151 an ideal choice for portable electronics.

In addition to its impressive performance metrics, the THS4151 is designed with thermal stability in mind. Its built-in features help minimize drift and improve accuracy over a wide temperature range, which is particularly important for precision measurement applications. The device also offers a low input offset voltage and low input bias current, ensuring minimal errors in amplification.

Another key characteristic of the THS4151 is its compatibility with a wide range of input and output loads, making it versatile for different circuit configurations. The amplifier can be easily integrated into various designs, from simple feedback configurations to more complex signal conditioning applications.

Overall, the Texas Instruments THS4151 stands out as a leading choice in the high-speed amplifier market, combining advanced technology, low power consumption, and robust performance to meet the demands of today's sophisticated electronic designs. Whether used in audio processing, video signal enhancement, or sensor interfacing, the THS4151 delivers reliability and precision that engineers and designers can count on.
Top Page Image Contents