Setting DIP Switches
Two DIP switches are provided inside the computer. These switches allow you to control whether an alarm
sounds when certain conditions are met.
1. Turn off the computer and disconnect the AC Adaptor if installed.
2. Locate the option card slot cover on the top left of the computer.
3. Remove the template strip on the top of the keyboard; this reveals a groove. Hook a flat-
headed object in the groove and open the option card slot cover.
4. You will find the DIP switches inside the slot. If any option card is installed in the slot,
remove the card to reveal the DIP switches, and store the card in a static free or protected
bag.
Setting Up 3-9