Texas Instruments TVP5158 manual Evaluation of Pixel-Interleaved Digital Video Output Modes

TVP5158EVM Evaluation Procedures www.ti.com

7.3Evaluation of Pixel-Interleaved Digital Video Output Modes

The TVP5158EVM can be programmed for pixel-interleaved modes as described below. The DM6467 DaVinci HD EVM does not support pixel interleave modes, so a different back-end processor is required for this evaluation.

1.In the VCC System Initialization dialog box, click the Browse button. The Open dialog box shown in Figure 14 appears. Double-click the following file:

TVP5158EVM_Pixel_Interleave_Setup.CMD

2.The dataset descriptions table should now appear as shown in Figure 17. Click once on the following table entry:

Multi-Standard, Pixel-Interleave, 2-Ch D1, 8-bit @ 54MHz (OCLK_P, OCLK_N @ 27MHz, Opposite Phase)

Click the PROGRAM button. The TVP5158 is now programmed to automatically detect the video standard received at the input and output video in the above pixel-interleaved format.

Figure 17. System Initialization for Pixel Interleave Modes

24	TVP5158 Evaluation Module	SLEU108 –November 2009
		Submit Documentation Feedback

Copyright © 2009, Texas Instruments Incorporated