Note: Your radio will only communicate with radios set to the same Channel and Interference Eliminator Code.

Changing your Radio’s Settings

Setting the Channel

• Turn radio On.

• To set, press once the Channel display begins to flash.

Then press or to choose the Channel.

Press to exit this menu.

Note: The red indicator light above the display flashes every second when the Channel is in use.

Setting the Interference Eliminator Code

The Interference Eliminator Code helps minimize interference by providing you with a choice of code combinations.

Turn radio On.

To set, press twice the Code display begins to flash.

Then press or to choose the Code.

Press to exit this menu.

Note: To hear everyone on your Channel, or to communicate with a radio that does not have Interference Eliminator Codes, select Interference Eliminator Code .

Changing your Radio’s Settings

18

Page 19
Image 19
The Lenbrook Group T7100 Changing your Radio’s Settings, Setting the Channel, Setting the Interference Eliminator Code