PROD-SS-66B Rev. H 6/03
© 2003 The Siemon Company
66 PRODUCTS
Siemon — EMEA HQ & UK
United Kingdom
Tel: +44 (0) 1483 480040
Siemon — France
Paris
Tel: +33 1 46 46 11 85
Siemon — Deutschland
Frankfurt
Tel: +49 (0) 69 97168 184
PRODUCT INFORMATIONSiemon — Italia
Milano
Tel: +39 (02) 64 672 209
WWW.SIEMON.COM
Because we are continuously improving our products, The Siemon Company
reserves the right to change specifications and availability without prior notice.
S66™is a trademark of The Siemon Company
For related product information request Spec Sheet(s):
Termination Tools (PROD-SS-S78)
white - blue
blue - white
white - orange
orange - white
white - green
green - white
white - brown
brown - white
Horizontal Cabling
Use the alternat-
ing fanning strip
slots for cross-
connect wires.
white - blue
blue - white
white - orange
orange - white
white - green
green - white
white - brown
brown - white
Horizontal Cabling
white - blue
blue - white
white - orange
orange - white
white - green
green - white
white - brown
brown - white
white - blue
blue - white
white - orange
orange - white
white - green
green - white
white - brown
brown - white
According to ANSI/TIA/EIA-568-B.1 and ISO/IEC 11801:2002, when terminating category 5e riser or horizontal cable, the
individual pairs must have their twists maintained within 13mm to the point of termination. When using the category 5e S66M1-50
block, The Siemon Company recommends that both conductors of each pair be inserted through the same slot in the fanning strip and
then split to the individual quick clips for termination. By doing this, the pairs will be inserted through every other slot in the fanning
strip. When cross-connect wire is installed, the cross-connect pairs can be inserted through the same slots in the fanning strip.
Category 5e cross-connect wire must be used to maintain category 5e performance.
Use the same
fanning strip
slots for cross-
connect wires.
Horizontal
Cabling Horizontal
Cabling
S66™M1-50 Block:
S66M1-50...................Pair Capacity 50, Quick Clip: 500,
category 5e height: 254mm, width: 86.4mm, depth: 30.5mm
Accessories:
Stand-off Brackets for S66 Blocks
S89B...........................Stand-off mounting bracket, can mount
one 25-pair connector on each side
S89D ..........................Stand-of f mounting bracket, can mount
two 25-pair connectors on each side
and four on the block
Bridging Clips
SA1-(XXXX).................
2-position bridging clip
SA1-SS-(XXXX)............
2-position bridging clip, stainless steel
Use (XXXX) to specify quantity:
100 = 100/bag, 1000 = 1000/bag
Stand-off Mounting Brackets
Lasting Hinge Covers
MC4LH-(X) ..................
Hinged protective plastic covers
Use (X) to specify colour:
2 = white, 3 = red, 4 = grey,
5 = yellow, 6 = blue, 7 = green,
8 = violet, 9 = orange
MC4...........................
Clear snap on cover
S89D stand-off bracket with
S66 block
S89B S89D