CD OR CD+G OPERATION
PLAY/PAUSE MODE
!To start playing, press the PLAY/PAUSE button. The first track [ ] and the PLAY/PAUSE LED will be lit.
!To temporarily stop playing, press the PLAY/PAUSE button. The PLAY/PAUSE LED Indicator will flash.
!To resume play, press this button again.
PLEASE NOTE: Pressing pause when a CDG is playing may cause distorted lyrics on the monitor. Any distortion will remain until the whole screen is refreshed during an instrumental break or you stop the song and start it from the beginning.
STOP MODE
If the STOP button is pressed in the course of playing, the disc will cease to play. (The total number of tracks will be shown on the LED window).
SKIP PLAY(FOR BOTH CD AND CDG)
!During STOP mode, you can skip up or down to your desired track number by pressing a
SKIP button (- SKIP
!To resume playing the selected song, press PLAY/PAUSE button.
SEARCH (FOR AUDIO CD ONLY)
When playing any audio CD, press and hold the SKIP button (
REPEAT
!To repeat the track currently playing, press the REPEAT button once. The REPEAT LED will start to flash.
!To repeat all tracks, press the REPEAT button twice. The REPEATLED will light up and stay lit.
!To clear the repeat function. Press the REPEAT button again. The REPEATLED will turn off.
PROGRAM
!Use this button to program and play back songs in a preselected order.
Step 1: Programming should be done in the stop mode only. Press the PROGRAM key
until the PROGRAM LED flashes, the track will read [].
Step 2: Press the double arrow keys (
Step 3: Press PROGRAM key to confirm entry. You can repeat the same steps up to a maximum of 20 tracks.
Step 4: Press PLAY to activate PROGRAM.
!Press the STOP button to clear all the programmed entries.
INTRO
!Press the INTRO button once, then press PLAY. The CD player will play up to 10 seconds of each track as an introduction.
!Press the INTRO button again to stop intro scan play.
Note: The first few seconds of some tracks are silence.
12