BAR SINKS
5.Fixture hole locations are identified with a gray label indicating the most desired placement. Position a chisel on the desired dot and strike with a hammer to break out the hole. Clean out fixture hole with a knife.
If hole is not used, peel off the label.
Attach faucet, drain, and accessories according to man- ufacturer’s instructions.
APPLY CAULK
6.Apply a bead of caulk (not included) to the underside of the sink flange and position sink into counter top opening.
7.Attach four (4) sink clips to underside of sink. Sink clips provided will accommodate a counter top up to
8.Connect all faucet supply lines, disposal (if available), and drain trap fittings per manufacturer instructions.
CHECK FOR LEAKS
•Supply user tubes to faucet
•Supply riser tubes to shut off valves or lower connections
•Fill sink with water and check for leaks around drain
•Release water from sink and check for possible leaks
•Tighten as needed
CLEANING |
| REPAIRING | AGGREGATE & GALAXY | |
Clean your Swanstone sink as | SOLID COLORS | COLORS | ||
you would any other fine bath | Use 400 grit sandpaper to | Use 400 grit sandpaper to | ||
fixture, using normal house- | remove scratches and gouges | remove scratches and gouges | ||
hold detergents and cleansers. | in the surface. A “scotchbright | in the surface. To blend in the | ||
Just wiping the wall surfaces | pad” can be used to blend in | area use a fine grade, white, | ||
quickly removes | watermarks | the area. | automotive polishing com- | |
and residues. | Occasional |
| pound or paste wax. | |
scrubbing | with | household |
|
|
abrasive | cleansers ensures |
|
|
that the original luster is maintained.
The Swan Corporation
One City Centre
St. Louis, MO 63101 (314)
Patent Pending
Form