The Swan Corporation Model KSEU-302020
x 39-3/8
508mm x 1000mm, 5/16
8mm, Width, Depth

KITCHEN SINK Model No. KSEU-3020

Step-By-Step Installation Instruction

Model KSEU-3020 20
x 39-3/8

(508mm) x (1000mm)

Tools Required

•Ruler

•Drill

•Caulk

•Saber Saw (if counter top cutout is required)•Screw DriverTRACE COMPLETELY

AROUND EDGE OF SINK

1.If it is necessary to cut out the counter top, invert sink and position onto the counter top. Locate sink front to rear and right to left so that the bowl(s) will not interfere with the cabinets below. Trace a pencil line around the outside edge of the sink and remove the sink from the counter top.

DRAW A 1-1/2
(38mm) RADIUS AT EACH CORNER

5/16
(8mm)

2.Measure in 5/16 (8mm) from the initial sink outline and draw a second line inside the first. Draw a 1-1/2(38mm) radius at each corner. This second interior line will be your cutout line.

	Check Cutout Line Measurements
Model	Width	Depth
KSEU-3020	38-3/4(984mm)	19-3/8(492mm)

Measure the cutout line or the pre-cut opening to be sure it conforms to the sizes listed.