Thermador DWHD651GFP manual DISHWASHERS SAPPHIRE 6-PROGRAM, Installation Options

DISHWASHERS SAPPHIRE™ 6-PROGRAM

Models: DWHD650GFP, DWHD650GPR

DISHWASHERS

INSTALLATION OPTIONS

CUSTOM DOOR PANELS (DWHD650GPR)

Fully integrated models allow you to have a custom door panel made to match your cabinetry. The custom door can be a two-piece configuration to look like a drawer at the top and a cabinet door at the bottom or like a single full-length door. A template is included with the fully integrated models to explain the mounting procedure.

NOTE: The door springs that are included with the fully integrated units will provide proper function for custom door panels weighing between 9 and 18 pounds. No tension adjustment screws are necessary.

WATER AND ELECTRICAL

LOCATIONS

For proper dishwasher operation and appearance, ensure that the enclosure is square and has the dimensions shown. Plumbing and electrical service must enter shaded area.

Make required openings to allow for passage of the water, drain and electrical line. In order to avoid interference with the dishwasher when sliding it into the cabinet, place your openings within the dimensions shown.

Sapphire Series Required Openings: 4 1/4" x 2" (108 x 52 mm) - To pass the included electrical supply junction box through to an adjacent cabinet

4" x 2" (100 x 50 mm) - To pass the included water supply line toward the water supply

1 1/4" (32 mm) diameter - To pass the dishwasher drain hose toward the drain connection

NOTE: If the incoming electric supply, water supply and drain connections are all in the same cabinet, the one 4 1/2" x 2 1/2" hole will be large enough for all three to pass through.

The dishwasher electrical supply junction box and dedicated receptacle must be mounted in an accessible cabinet adjacent to the dishwasher (do not mount the junction box or receptacle behind the dishwasher). You will need a 4 1/4" x 2" (108 x 51 mm) opening through the cabinet in order to pass the junction box through.

The electrical supply can be connected in one of two ways:

–Use the included three prong plug and junction box to connect to a dedicated household receptacle.

–Permanently connect to household or field wiring

DISHWASHER & CUTOUT DIMENSIONS

DWHD650GFP

DWHD650GPR

WATER AND ELECTRICAL LOCATION DIMENSIONS

24"			Describes
	(61cm)		the space
90°			(if any)
2"			between
(5cm)			cabinets
		34¼"(86.7cm)	and wall
4" (10cm)
		cm)
		.6
-61
(61
¼"
-24
24"

1.800.735.4328 THERMADOR.COM

Describes the cutout of adjoining cabinets

285