Thermador DWHD651GFP manual Installation Options, Dishwasher & Cutout Dimensions, Dishwashers

INSTALLATION OPTIONS

CUSTOM DOOR PANELS (DWHD410GPR)

Fully integrated models allow you to have a custom door panel made to match your cabinetry. The custom door can be a two-piece configuration to look like a drawer at the top and a cabinet door at the bottom or like a single full-length door. A template is included with the fully integrated models to explain the mounting procedure.

NOTE: The door springs that are included with the fully integrated units will provide proper function for custom door panels weighing between 9 and 15 pounds. Custom door panels weighing up to 18 pounds require the use of the tension adjustment screws.

WATER AND ELECTRICAL

LOCATIONS

For proper dishwasher operation and appearance, ensure that the enclosure is square and has the dimensions shown. Plumbing and electrical service must enter shaded area.

Make required openings to allow for passage of the water, drain and electrical line. In order to avoid interference with the dishwasher when sliding it into the cabinet, place your openings within the dimensions shown.

DISHWASHERS QUARTz™ 4-PROGRAM

Models: DWHD410GFM, DWHD410GPR

DISHWASHER & CUTOUT DIMENSIONS

DWHD410GFM	*24"-241/4"24"
	239/16"
30"	229/16"	min.
337/8"-		34"
35"
39/16"-	39/16"
	239/16"
411/16"
	23/8"
	39/16"
*235/8" without decor strips
DWHD410GPR	*235/8" without Decor Strips
	*24-241/4"24"

	239/16"	213/4"
337/8"	1/
-35"	23 8"-	min.
	233/8"
**max.		34"
307/16"		5/8"-7/8"
		39/16"
39/16"
-411/16"		23/8"
** measured from		39/16"

the bottom edge of the countertop panel thickness recommended 3/4" panel weight 9-18 lb

WATER AND ELECTRICAL LOCATION DIMENSIONS

					24"	(610mm)
90°
			2"		(50mm)		(864mm)
(95mm)
							34"
"		4"
/4
3				(100mm)
3
					-616mm)
		1/"(600
		24		4
5/ "		-
23	8

DISHWASHERS

1.800.735.4328 THERMADOR.COM 281