Operating the Dishwasher (continued)
End Signal
The dishwasher emits a tone (five times) to let you know that your dishes are clean and dry. You can change the tone volume or you can disable it.
NOTE: In the Options Step Down Menu you can return to the main menu at any time by pressing the START button.
1.Open the dishwasher door far enough to expose the control panel.
2.Press the ON/OFF button.
3.Press the MENU/OK button four times to display the current End Signal setting
4.Press the + or – buttons to obtain the desired volume.
·End Signal 6 – loudest setting (factory default setting)
·End Signal 0 – End Signal disabled
5.After selecting the desired volume, you must press the MENU/OK button to save the setting. The display will show “Value Stored” and return to the main menu. If you did not change the volume, press the START button to return to the main menu.
6.Select the desired wash cycle by pressing the – or + buttons.
7.Press START and close the dishwasher door to begin the cycle.
Rinse Agent Adjustment
This option allows you to adjust the amount of rinse agent the dishwasher will dispense to control spotting or streaking.
NOTE: In the Options Step Down Menu you can return to the main menu at any time by pressing the START button.
1.Open the dishwasher door far enough to expose the control panel.
2.Press the ON/OFF button.
3.Press the MENU/OK button five times to display the current rinse agent setting.
4.Press the + or – buttons to display the desired amount of rinse agent.
5.If your glassware is spotted, press + to increase the amount of rinse agent dispensed. If your glassware is streaked, press – to decrease the amount of rinse agent dispensed.
·Rinse Agent 6 – maximum amount of rinse agent available
·Rinse Agent 4 - factory default setting
·Rinse Agent 0 – rinse agent dispenser disabled
6.After selecting the desired amount of rinse agent to be dispensed, you must press the MENU/OK button to save the setting. The display will show “Value Stored” and return to the main menu. If you did not change the rinse agent amount, press the START button to return to the main menu.
7.Select the desired wash cycle by pressing the – or + buttons.
8.Press the START button and close the dishwasher door to begin the cycle.
Display Language Selection
This option allows you to select the display language. The first time that you use your dishwasher this screen will automatically appear.
NOTE: In the Options Step Down Menu you can return to the main menu at any time by pressing the START button.
1.Open the dishwasher door far enough to expose the control panel.
2.Press the ON/OFF button.
3.Press the MENU/OK button six times to display the current language setting
4.The available language choices are:
·AE = American English
·CF = Canadian French
·MS = Mexican Spanish
5.Press the + or – buttons until the desired language flashes.
6.After changing the language selection, you must press the MENU/OK button to save the setting. The display will show “Value Stored” and return to the main menu. If you did not change the language, press the START button to return to the main menu.
7.Select the desired wash cycle by pressing the – or + buttons.
8.Press START and close the dishwasher door to begin the cycle.
12
