Thermador MET27B, MET30B installation instructions b, Trim Kit Model

Step 2: Preparing the Cabinet

•The cabinet cutout dimensions are shown in Figure 1.

•It is a good practice when the microwave oven is installed at the end of a cabinet run, adjacent to a perpendicular wall or cabinet door, to allow at least 1/2" (12.7 mm) space between the side of the trim and wall or door.

	Trim Kit Model
Dimension	MET27B	MET30B
TrimHeight	17-1/4"	17-1/4"
Trim Width	26-3/4"	29-3/4"
Cutout Height (A)	17" ±1/16"	17" ±1/16"
Cutout Width (B)	25-1/2" ±1/16"	28-1/2" ±1 16"
Depth (C)	24" ±1/16"	24" ±1/16"

•Your microwave oven can be installed into a cabinet or wall by itself or above any of the following Thermador wall ovens: C271, C301, CM301, S301, SC301. Or, Thermador Warming Drawers WD27 and WD30 (see Figures 2a and 2b).

•Outlet can be located anywhere within the shaded area as indicated in Figure 1.

	14"
➝4"	➝	➝

➛

Figure 1	A
	➛	Outlet should be	4"
		in the shaded area.

➛	B	➛
		C
		➛
1" (25.4 mm) minimum		➛
from cutout to wall.

1"

(25.4 mm)

}

1-3/4"

(44.5 mm)

}

Microwave Cutout

Thermador single wall oven cutout

Figure 2a Figure 2b

Bottom of microwave shelf

1-1/2"

Microwave } (38 mm) cutout

Warming

Drawer cutout

Page 4