Care and Use Manual

Thermador Professional® Indoor Grill

SAFETY PRECAUTIONS

ELECTRICAL REQUIREMENTS AND GROUNDING INSTRUCTIONS

PLEASE READ CAREFULLY

The Thermador PROFESSIONAL® Indoor Grill re-

quires an electrical circuit rated at 120 volts, 60 Hz., 15 Amps.

For personal safety, this appliance must be connected to a properly grounded and polarized electrical power supply.

Always disconnect the electrical plug from the wall receptacle before servicing this unit.

See Installation Instructions for electrical requirements and grounding instructions.

DO NOT UNDER ANY CIRCUMSTANCES CUT OR REMOVE THE SEPARATE GROUND WIRE OR THE THIRD (GROUND) PRONG FROM THE POWER CORD PLUG.

It is the personal responsibility and obligation of you, the user, to have this appliance connected to the electrical power supply in accordance with the National Electrical Code and/or applicable local codes and ordinances by a qualified electrician.

It is recommended that a dedicated circuit servicing this appliance be provided.

!CAUTION

In Case of an Electrical Failure

If for any reason a gas control knob is turned ON and there is no electric power to operate the electronic igniters on the grill burners,turn OFF the gas control knob and wait 5 minutes for the gas to dissipate before lighting the grill burner manually.

To light the grill burners manually, carefully hold a long-stem lighted match or a multi-purpose long disposable lighter to the burner ports and turn the gas control knob to HI. During a power failure, you can manually light the grill burners, but each burner must be lit with a long-stem match or a multi-purpose long disposable lighter.

See Page 7 for additional information on manually lighting the burners.

Page 2