Thermos 465630503 manual Through holes in plinth and leg Foot Graphics In Front

1.Assemble FRONT handle hub to leg as shown below.

a.Insert “foot” into large hole.

b.Press hub flat against leg.

c.Align coach bolt hole with hole in aluminum block.

d.Push long coach bolt through aluminum block on the back side of leg.

e.Permanently attach hub to leg with two self-tapping handle hub screws. DO NOT

OVERTIGHTEN SCREWS. Stripping may occur.

Long coach bolt passes completely through holes in plinth and leg.

Front Handle Hub (Part MM)

Handle Hub

Screw

Graphics In Front

Foot

2. Assemble REAR handle hub to leg by repeating steps 1a–1e.

	Rear Handle	Handle
Long coach bolt passes completely	Hub (Part NN)	Hub Screw
through holes in plinth and leg.

Foot

Graphics In Front

10 • Grill2Go Express