Appendix D | Specifications |
|
|
|
| |||
Inputs: | Analog audio: |
|
|
|
|
|
| |
|
| 1 |
|
| ||||
|
| 1 Balanced per channel (XLR). |
|
| ||||
|
| Input Impedance: | 50 KΩ |
| ||||
|
| Input sensitivity: | 1.5V RMS input for 100W into 8 ohms. | |||||
|
|
|
|
| (Balanced) | 0.75V RMS input for 100W into 8 ohms. | ||
|
| Gain: |
|
| 25.5dB (19x). |
| ||
|
|
|
|
| (Balanced) | 31.5dB (38x). |
| |
|
| Polarity: |
|
| ||||
|
|
|
|
| (Balanced) | |||
Outputs: | Analog Audio: | 1 balanced output per channel. |
| |||||
I/O |
| RS232: 1 DB9 and 1 RJ45 connector. |
| |||||
Modes/Processes: | Standby:All channels are muted and output bias is reduced to 40%. |
| ||||||
|
| Thermal:One or more channels has overheated; amp automatically switches to Standby. | ||||||
Power Output: |
| (8 |
| 100 W (rated) | 130 W (typical) | |||
|
| (8 | 100 W (rated) | 115 W (typical) | ||||
|
| (4 |
| 200 W (rated) | 210 W (typical) | |||
Frequency Response: |
| |||||||
THD+Noise: |
| <2% |
|
|
|
|
|
|
Signal to Noise Ratio: | (unweighted) >100dB |
|
|
| ||||
Power Requirements: | 117 VAC, 7.7 amp; 230 VAC, 4 amp; | |||||||
Power Consumption: | 80W | @ Standby; 100W @ idle; 900W @ full power. |
| |||||
Standby Trigger Input: |
| |||||||
Dimensions: |
| 17 5/8" W x 6 1/4" H x 20 1/2" D (448 x 159 x 521 mm) |
| |||||
Weight: |
| 58 Lbs. Stand alone (26.3 Kg), 64 Lbs. Boxed with accessories (29 Kg) | ||||||
Maximum Operating Temperature: | Internal: 176° | F (80° | C) |
| ||||
|
|
|
| Room: 131° | F (55° | C) |
|
13