Thiel Audio Products SS1 Subwoofer manual Fuse Replacement, Specifications, Warranty

Fuse Replacement

If the subwoofer is completely dead, with no indicator light on, the main fuse has probably blown and will need to be replaced. The fuse should be replaced only with an equivalent type. The fuse type is 5 x 20 mm size, slo-blow or time delay type, with a rating of 3.2 amp for 230 volt units and 6.3 amp for 115 volt units. The BUSSMANN number is GDC-3.15A or GDC-6.3A, respectively. Littlefuse numbers are 2183.15 or 2186.3. Or contact THIEL for a replacement fuse.

Replace the fuse by first unplugging the power cord from the subwoofer and then, using a small screwdriver, remove the fuse holder from the AC inlet to gain access to the fuse. See illustration.

Specifications
Amplifier	Power output (at 120 or 240 line voltage)		500 watts RMS
	Line voltage		90-130 or 180-260
Cabinet	Response	Normal input: 12 Hz–300 Hz, ±0.5 dB; LFE input 17 Hz–300 Hz, ±0.5 dB
	Bandwidth	Normal input 10-800 Hz, ±3 dB; LFE input: 16–800 Hz, ±3 dB
	Sensitivity		1 volt for 120 dB @ 1 m, 4π
	Size (inches height, width, depth)	.................................................................................................	20, 101/2, 15
	Weight (pounds)		80
	Driver		10"
	Driver displacement (cu in)		65
	Output dB @ 20Hz / 30Hz (corner placement)		99 / 106

Warranty

THIEL warrants every THIEL SmartSub system against defects in materials and workmanship to the original owner for a period of ten years from the date of purchase. THIEL will, at no charge, replace any defective part and make any repairs necessary to ensure its proper performance when the defective unit is returned to us postpaid.

This warranty does not cover damage due to accident or abuse and is void if the unit has been tampered with.

This warranty is automatic and no registration is required. This warranty gives you specific legal rights. You may also have other rights which are particular to your state.

14