Thiel Audio Products SS1 Subwoofer Product Features, Very High Output, Very Low Distortion Woofer

Product Features

The THIEL SS1 SmartSub is a very high performance, innovative subwoofer system that provides exceptionally deep, uniform, dynamic and low distortion bass reproduction. In addition, it provides near-ideal performance with any room placement and, when used with the companion SI1 Integrator, provides near-perfect integration with any type of main loudspeaker. These performance abilities are the result of new patented technology developed to overcome the major problems that subwoofers typically exhibit: poor integration with the main speakers and altered response due to nearby walls.

These subwoofers can be used as stand-alone units, with a THIEL passive crossover or with the SmartSub Integrator, depending on your requirements. Here is a brief description of some of the unusual performance features these subwoofer systems provide.

Very High Output, Very Low Distortion Woofer

The SS1 uses a very high output, very low distortion 10" driver that utilizes an aluminum diaphragm, heavy cast chassis and THIEL’s short coil/long gap, copper stabilized motor system powered by a 10 lb magnet in a structure with a total weight of 20 lbs.

The short coil/long gap design results in very low distortion levels that are only one-tenth that of typical drivers with the same excursion rating. This magnet system’s very long magnetic gap, along with the very high excursion suspension, allows the driver to move a very large amount of air – much more than most drivers its size – in order to effortlessly reproduce even demanding sources at high volume levels.

SS1 SmartSub driver

500

WattSS1 500 watt amplifier

Amplifier

The SS1 is

powered by an innovative high efficiency 500 watt RMS amplifier. The amplifier’s very high power ensures that the woofer can provide all the output it is capable of without power compression or limiting.

Placement Correction

Placement controls (patented) match the subwoofer’s performance to its environment, whether away from walls, in a corner or anything in-between. These controls correct for both the general increase in level and for the partial cancellation of certain frequencies caused by a nearby wall. By providing correction of these effects for both the side and rear walls, SmartSubs provide accurately balanced, uniform response with virtually any room placement.

Protection from overheating

An automatic shutdown feature is included that protects the driver from excessive heat produced by input levels that are excessively high. A

shutdown is automatically executed if the temperature reaches a dangerous level and is automatically restarted when the temperature

falls to a safe level. Heat sensor on voice coil

4