Thank You!
Thank you for choosing a Jensen product. We hope you will find the instructions in this owner’s manual clear and easy to follow. If you take a few minutes to look through it, you’ll learn how to use all the features of your new Jensen receiver for maximum enjoyment.
Features
Features of the Jensen AWM970 mobile audio system include:
•Digital AM/FM Tuner
•Skip Protected Disc Mechanism
•
•Time/Alarm Clock
•Backlit Controls
•Auxiliary Audio/Video Input
•USB Input
•iPod Control
•Headphone Output
•3 Zone / 6 Speaker Output
•Wireless Remote Included
Precautions
•Use the Proper Power Supply.
This product is designed to operate with a 12 volt DC, negative ground battery system (the standard system in a North American vehicle).
•Protect the Disc Mechanism.
Avoid inserting any foreign objects into the slot of this player. Failure to observe this may cause malfunction due to the precise mechanism of this unit.
•Use Authorized Service Centers.
Do not attempt to disassemble or adjust this precision product; contact a professional for assistance.
•Avoid Moisture.
To reduce the risk of fire or electric shock, do not expose this equipment to rain or mois- ture.
•Avoid Cleaning Products.
The front of this unit should only be cleaned with a slightly damp cloth. Do not use cleans- ers.
•Use Recommended Accessories.
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK AND ANNOYING INTERFER- ENCE, USE ONLY THE RECOMMENDED ACCESSORIES.
CAUTION: This mobile DVD player is a Class I laser product that uses a visible/invisible laser beam which could cause hazardous radiation exposure if improperly directed. Be sure to operate the mobile DVD player as instructed. Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. Do not open covers and do not attempt to repair the unit yourself. Refer servicing to qualified personnel.
AWM970
Tools and Supplies
You will need these tools and supplies to install your AWM970:
•Philips screwdriver
•Wire cutters and strippers
•Tools to remove existing radio (screwdriver, socket wrench set or other tools)
•Electrical tape
•Crimping tool
•Volt meter/test light
•Crimp connections
•16 gauge wire for power connections
•16 – 18 gauge speaker wire
Disconnecting the Battery
To prevent a short circuit, be sure to turn off the ignition and remove the negative
NOTE: If the AWM970 is to be installed in a vehicle equipped with an
2
