Think Outside iPAQ 1940 iPAQ 1945 iPAQ 2210 Scan, Scan, Scan, Red LED, Discoverable, New Connection, New Connection, Stowaway BT Keyboard

4.The New Connection window is used to connect the Pocket PC device to the Stowaway BT keyboard. Tap New Connection to begin the process.

5.Before starting the scan make sure the keyboard is Discoverable by the Pocket PC device. To do this, press the <Ctrl> <Left Fn> <Right Fn> keys together on the keyboard until the green LED flashes (~ 1 second). Then tap the Scan button on the screen.

6.Wait until the Stowaway BT Keyboard appears in the list. If the keyboard does not show up:

a.Try pressing the <Ctrl> <Left Fn> <Right Fn> keys together on the keyboard and tapping the Scan button on the screen again.

b.Or, power cycle the keyboard (close and reopen), then press <Ctrl> <Left Fn> <Right Fn> and tap Scan again.

c.If neither of the above steps work, check that the Red LED on the keyboard is not lit after a power cycle indicating a dead battery condition.

Stowaway Universal Bluetooth Keyboard Owner’s Manual Page 5