10.If you choose a secure connection by checking the Secure box, the Pocket PC Bluetooth system software will prompt you for a passkey. You are likely to see the Bluetooth Passkey dialog shown here, but this is variable by device. Enter a passkey using the Pocket PC on-screen keyboard, then tap OK in the top right corner of the window. Type the same passkey number on the Stowaway BT keyboard, using <Left Fn> + <Number> keys. When finished, press the <Enter> key.

NOTE: The passkey must contain only digits, for example 1234.

11.If the passkey is not entered correctly, the connection will fail. In this case you will need to press the <Ctrl> <Left Fn> <Right Fn> keys together on the keyboard and tap Connect again.

NOTE: Please, make sure that the passkey is entered on-screen first, tap OK and then follow with the passkey on the keyboard. When finished, press the <Enter> key on the keyboard.

12.If the connection process is successful, the Secure keyboard connection enabled message will display on the Pocket PC device. This is the normal mode for wireless communication between the Stowaway BT keyboard and the Pocket PC device during use.

Stowaway Universal Bluetooth Keyboard Owner’s Manual

Page 7