Thomas & Betts EZL-100 manual Cleaning Your Printer, Thomas & Betts Label Cassettes

To serialize your labels

1.Enter the text for your label.

2.Use the arrow keys to move the cursor under the letter or number to serialize.

3.Press SERIAL .

4.Enter the number of labels you wish to print and

press or Print to begin printing. Enter 1-99 for numbers and 1-26 for letters.

To print multiple copies of the same serialized label, choose + Print and enter the number of copies of each label to print. See Printing Multiple Copies on page 9.

Adjusting Print Quality (Advanced)

Depending on the label material you choose, you may need to lighten or darken the print on the label. Adjusting the print head temperature allows you to control the print quality (+/- 20).

To set the print head temperature

1.	Press +		.
		SAVE
2.	Use the arrow keys to select the print head
	temperature and press .

3.Repeat as necessary until you are satisfied with the print quality.

10

Cleaning Your Printer

Your printer is designed to give you long and trouble-free service, while requiring very little maintenance.

Clean your printer from time to time to keep it working properly. Clean the cutter blade each time you replace the tape cassette.

To clean the cutter blade

1.Remove the tape cassette.

2.Press and hold down the cutter lever to expose the cutter blade.

3.Use a cotton ball and alcohol to clean both sides of the blade.

4.Release the cutter lever.

To clean the print head

➤Clean the print head using the cleaning tool located inside the tape compartment lid.

Thomas & Betts

Label Cassettes

The following label cassettes are available for the EZL-100 thermal label printer.

Material Type	3/8”	1/2”	3/4”	Length
	(9 mm)	(12 mm)	(19 mm)
Flexible Nylon	—	EZ-WN12	EZ-WN34	11.5’
White				(3.5 m)
Flexible Nylon	—	EZ-YN12	EZ-YN34	11.5’
Yellow				(3.5 m)
Permanent Polyester	EZ-WP38	EZ-WP12	EZ-WP34	18.0’
White				(5.5 m)
Permanent Polyester	EZ-MP38	EZ-MP12	EZ-MP34	18.0’
Metallic				(5.5 m)