2. GENTLY fold the upper limbs up toward the head.
2. Switch the alarm ON using the ON/OFF switch. Don’t forget to |
turn off the alarm when not in use to preserve your battery life. |
3. Select one of the three |
the ALARM SOUND EFFECT SELECTION BUTTON. A brief sample |
of the sound will be heard each time you select a sound. Continue |
to press the ALARM SOUND EFFECT SELECTION BUTTON until you |
hear the sound you want to use as the alarm sound. The last |
sound selected will be heard when an intruder trips the alarm. |
The red Alarm Active Indicator Light will light for 9 seconds and |
then flash after a sound has been selected. |
NOTE: The alarm sounds can be changed or selected only when |
the red Alarm Active Indicator Light is flashing. |
4. An intruder entering the Intruder Detection Area will trip the alarm. |
3. |
GENTLY fold the lower limbs in toward the body.
The selected alarm sound will be heard and the Room Alarm will |
open to the “attack” position, if the Room Alarm was reset to the |
“closed” position before an intruder was detected. After the alarm |
sound stops, reset the Room Alarm to the “closed” position and |
the alarm sound will reset itself, waiting for the next intruder. |
4. DEFECT OR DAMAGE |
If a part of your ANIMATED DESTROYER DROID ROOM ALARM is damaged or something has been left out, DO NOT RETURN THE
4. GENTLY fold the guns upward toward the head.
5. The “closed” Room Alarm should look like as indicated above. The destroyer droid will have its head down, upper limbs folded up toward the head, the lower limbs folded in toward the body, and the guns folded up toward the head.
The Room Alarm is designed to detect very small changes in heat. It is important to know that the Heat Sensor is set up to detect intruders that interrupt the Intruder Detection Area. Stand the Room Alarm on any flat surface. Rotate the Room Alarm so that the sensor lens faces the direction desired for the Intruder Detection Area. See the diagram below to further understand how to position the Room Alarm.
Set on table or other |
flat surface. Turn so |
Heat Sensor Lens |
faces desired Intruder |
Detection Area. |
Intruder |
Detection |
Area |
Rotate the Room Alarm to the desired position to customize the direction of the Intruder Detection Area. While sitting on a flat surface, point the Heat Sensor lens in the desired direction. A few trial activations may help to determine which direction will activate the alarm. Note that the detection area extends to the front and sides of the Room Alarm. An intruder must interrupt the Intruder
Detection Area as shown above and then the alarm will activate.
1.Reset the Room Alarm so it is in the “closed” position (see diagrams above). If the Room Alarm is in the “attack” position when an intruder is detected, it will sound the alarm but it will not move. Resetting the Room Alarm into the “closed” position before an intruder is detected will allow the Room Alarm to sound the alarm and open to the “attack” position when an intruder is detected.
GAME TO THE STORE. The store doesn’t have replacement parts. Instead, write to us at:
Tiger Electronics, Ltd. Repair Center 980 Woodlands Parkway,
Vernon Hills, Illinois 60061, U.S.A.
Please include a note with your return explaining the problem along with a sales slip, date, place of purchase and price paid. We will do our best to expedite your return promptly.
5. 90-DAY LIMITED WARRANTY
Tiger Electronics, Ltd. (Tiger) warrants to the original consumer purchaser of this product that the product will be free from defects in materials or workmanship for 90 days from the date of original purchase. This warranty does not cover damages resulting from accident, negligence, improper service or use or other causes not arising out of defects in materials or workmanship.
During this
Product returned to Tiger without proof of the date of purchase or after the
The foregoing states the purchaser’s sole and exclusive remedy for any breach of warranty with respect to the product.
All product returned must be shipped prepaid and insured for loss or damage to:
Tiger Electronics, Ltd. Repair Dept.
980 Woodlands Parkway,
Vernon Hills, Illinois 60061, U.S.A.
The product should be carefully packed in the original box or other packing materials sufficient to avoid damage during shipment. Include a complete written description of the defect, a check if product is beyond the
THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES AND NO OTHER REPRESENTATIONS OR CLAIMS OF ANY NATURE SHALL BE BINDING ON OR OBLIGATE TIGER IN ANY WAY. ANY IMPLIED WARRANTIES APPLICABLE TO THIS PRODUCT, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE NINETY (90) DAY PERIOD DESCRIBED ABOVE. IN NO EVENT WILL TIGER BE LIABLE FOR ANY SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES RESULTING FROM POSSESSION, USE, OR MALFUNCTION OF THIS TIGER PRODUCT.
Some states do not allow limitations as to how long an implied warranty lasts and/or exclusions or limitations of incidental or consequential damages, so the above limitations and/or exclusions of liability may not apply to you. This warranty gives you specific rights, and you may also have other rights which vary from state to state.
For more information about Tiger Electronics, our products and special promotions, please visit our Web Site at: www.tigertoys.com
© Lucasfilm Ltd. & TM. All rights reserved. Used under authorization.
®, TM, & © 1999 Tiger Electronics, Ltd. All rights reserved. 980 Woodlands Parkway, Vernon Hills, Illinois 60061, U.S.A.
®, TM, & © 1999 Tiger Electronics UK Ltd. All rights reserved. |
|
Belvedere House, Victoria Avenue, |
|
Harrogate, North Yorkshire HG1 1EL, England. | PRINTED IN CHINA |
www.tigertoys.com |
